When maintaining or repairing the hydraulic system on an MTZ (Belarus) tractor, getting the correct hose length and connection thread is essential. The M27×1.5 hydraulic hose, 1000 mm long, is a straightforward replacement hose intended for agricultural hydraulic applications, including systems involving pumps, distributors, and hydraulic cylinders.
Product Overview
With an overall specified length of 1000 mm (1 metre) and M27×1.5 connections, this hose is suitable where those dimensions correspond to the original hydraulic line.
The flexible construction is particularly useful on agricultural machinery because hydraulic hoses can accommodate movement and vibration that would make rigid pipework less suitable. Correct installation remains important: hydraulic hoses should not be twisted, stretched under axial tension, or installed with excessively sharp bends.
For an MTZ owner, this is essentially a practical replacement part rather than a component requiring complicated adjustment—provided the thread, fittings and hose specifications match the machine.
Product Specifics
| Specification | Details |
|---|---|
| Product | Hydraulic Hose |
| Application | Tractor / Agricultural Machinery Hydraulics |
| Compatible Brand / Category | MTZ / Belarus |
| Connection Thread | M27 × 1.5 |
| Length | 1000 mm / 1 m |
| Product Code / SKU | 127.32*1000 |
| Referenced Image / Part No. | 127.22-1000 |
| System | Hydraulic |
| Suitable For | Pumps, distributors, cylinders, and associated hydraulic circuits |
| Unit Quantity | 1 hose |
| Condition | New |
Important note about the EAN: I could not find a reliable source establishing an EAN/GTIN for 127.32*1000 or 127.22-1000. I would therefore not invent an EAN or use a generic barcode. If this is being entered into eBay and the actual hose or packaging has no barcode, use the appropriate “Does not apply” option where eBay permits it.
What I Like About It
The main advantage is simplicity. You already know the three important identifiers: M27×1.5, 1000 mm, and the supplier code 127.32*1000. That makes it considerably easier to compare an old hose before ordering.
The one-metre length also gives enough flexibility for installations where the hose needs to accommodate normal tractor movement and vibration rather than being routed as a completely rigid connection.
Things to Check Before Buying
The M27×1.5 thread and 1000 mm length alone aren't enough to guarantee compatibility with every MTZ hydraulic connection. Before replacing an existing hose, compare the end fittings on both sides, sealing arrangement, hose bore/diameter, and required working-pressure rating.
This is especially important with hydraulics. Installation guidance recommends avoiding twisting, axial tension, and sharp bends, and providing sufficient slack for movement during operation.
Verdict
The M27×1.5 × 1000 mm hydraulic hose is a useful, uncomplicated replacement part for compatible MTZ/Belarus agricultural hydraulic systems. Its clearly defined metric thread and one-metre length make identification easy, while the flexible hose construction is well suited to machinery exposed to movement and vibration.
Rating: 4.5/5 – a practical replacement hose, with the only caveat being that buyers should verify the complete fitting and pressure specifications rather than relying on thread size and length alone.
No comments:
Post a Comment