Vincent Polyline Fungi PRO is a strong chlorine-based cleaner designed to remove mould, algae, fungal growth, and dark stains from hard surfaces. Its 9% sodium hypochlorite formulation provides a bleaching effect, making it especially suitable for tile joints, bathroom surfaces, shower areas, sinks, masonry, concrete and exterior walls.
The product is straightforward to apply using the spray trigger or a soft brush. Spread it generously over the affected area and leave it to work for about ten minutes. Heavily stained surfaces may require several applications, after which you can rinse the area with clean water if needed.
One of the main advantages is its relatively fast action. The 0.75-litre bottle covers approximately 2.25–3.75 square metres, depending on the surface condition and how heavily the product is applied. The spray bottle is convenient for smaller areas, corners and tile joints.
However, this is a highly alkaline and corrosive product rather than a mild everyday cleaner. It may discolour painted, decorative, coloured or delicate surfaces, so testing it first on a small hidden area is important. A chlorine-like smell may remain temporarily after treatment.
Fungi PRO must be used with good ventilation and suitable protective gloves and eye or face protection. It must never be mixed with acids or other cleaning products, as dangerous chlorine gas may be released.
Overall, Vincent Polyline Fungi PRO is a practical, powerful mould remover for durable mineral and tiled surfaces. It is best suited to stubborn mould and algae problems where a strong bleaching cleaner is appropriate, provided that the label instructions and safety precautions are followed carefully.
| Detail | Information |
|---|---|
| Brand | Vincent Polyline |
| Product name | Fungi PRO |
| Product type | Fungus, algae and mould cleaner with bleaching effect |
| Volume | 0.75L |
| EAN / Barcode | 4751001373360 |
| Active ingredient | 9% sodium hypochlorite |
| pH level | 12–14 |
| Exposure time | Approximately 10 minutes |
| Coverage | 3–5 m² per litre |
| Estimated coverage per bottle | Approximately 2.25–3.75 m² |
| Suitable surfaces | Masonry, concrete, stone, walls, foundations, tiles, tile joints and selected household surfaces |
| Use | Indoor and outdoor |
| Storage temperature | +5°C to +30°C |
| Shelf life | 2 years from manufacture date |
No comments:
Post a Comment